Actuator Fluid Control | YC-K17
17183
page-template-default,page,page-id-17183,page-child,parent-pageid-16910,ajax_fade,page_not_loaded,,qode-child-theme-ver-1.0.0,qode-theme-ver-16.3,qode-theme-bridge,wpb-js-composer js-comp-ver-5.4.7,vc_responsive
 

YC-K17

Hydraulic

[layerslider_vc id=”4″ el_class=”product-slider”]

Family Products Y-540-700-K11-K17

This is the most powerful actuator series manufactured by AFC. Thanks to the double scotch yoke configuration the actuator is perfectly balanced and easy to move and match to the valve. It is available only in the hydraulic version, it can develop torques up to 1.700.000 Nm and reach less than 4 seconds operating time including time for braking.

A particular Hydraulic dumper system guarantees a rapid and controlled deceleration without sudden shocks thus avoiding water hammer and the resulting excessive pressurization of the cylinder.

It is possible to set the damper’s efficacy and point of insertion during the braking. The hydraulic communication allows the braking to be simultaneous and perfectly balanced in the two cylinders, reducing shock and vibrations.

As for every AFC actuators the part subjected to rubbing/friction are equipped with bearings and chromed surfaces.

  • Output torque up to 1.700.000 Nm only hydraulic execution
  • Double scotch yoke design, compact size and balanced weight
  • Guide bar to absorb lateral load and guarantee extended life
  • Compact spring cartridge reduce weight and total lenght
  • Canted or Symmetric design to best adapt to the valve torque
  • In line travel stop 90° ±4° to eliminate asymmetrical loads
  • Easily visible local position indicator with Namur interface
  • Std. temperatures (-30° +100°); low (-60°) and high (+200°) on request
  • Totally enclosed IP 66 construction; IP 67 and IP 68 on request
  • Multiple spring design, increased reliability and std. configurations
  • Suitable for high frequency and high speed operation (< 4 s)
  • modulation and ON/OFF design to operate in all conditions
  • Limit switches for remote position indication
  • Compliant to PED 97/23/EC. and ATEX
  • Double/single acting (only hydraulic execution)
  • Gas over Oil” and “Direct Gas” , execution
  • Hydraulic override for manual operation.
  • Fast acting with hydraulic dumper (less then 4 seconds)
  • Hydraulic speed regulator.

Please Log-in to Download afc documentation

BRO-AFC   – General Company and Products Brochure

IOM-Y-K17 – Installation, Operation and Maintenance Manual

CAT-Y-K17 – Catalog with Torque & Dimensional Data

BRO-Y-K17 – Product Serie Presentation’s Brochure